There are few things more frustrating than stepping into the shower only to find there’s not nearly enough water pressure to give you a satisfying, relaxing clean. The same is true for turning on the sink to wash your hands or do the dishes—low water pressure in Shreveport, LA is a major inconvenience at best, and prevents you from getting clean at worst.
Usually when you are dealing with low water pressure in your home, there is a specific cause you should be able to identify and resolve. Here are just a few examples of some of the most common causes of low water pressure, and some potential repairs for each:
- Leaks: Low water pressure could be a sign that you have a leak somewhere in your plumbing between the water source and the faucet or showerhead. Water that flows out through a crack or hole results in the overall pressure of the water past that point dropping. If the leak is in an area with exposed piping, you might be able to find it yourself, but if the leak is behind a wall, it’s going to be difficult unless you see wet spots in the drywall or plaster. Your best bet is to get a professional plumber out to your house to find and resolve the leak before it causes any significant damage to your home.
- Mineral deposits: If the water pressure is low in just one or two fixtures, the problem could very well be with a mineral or debris buildup in the faucet or showerhead. There are a couple ways in which basic plumbing maintenance in Shreveport, LA can resolve this. You might need to take the showerhead or faucet apart to clean it out. Otherwise, you could try filling a plastic bag with vinegar, and then tie it around the faucet or showerhead with a rubber band to let the fixture soak for a few hours. The acidity of the vinegar should eat away at the deposits, causing them to loosen up and flow away.
- Other people using the water: Low water pressure can, in some cases, be caused by your neighbors, especially if you keep similar schedules throughout the day. If everyone showers at the same time, the pressure will be lower. The issue could also lie with your municipal water supply, in which case you’ll need to get in contact with your supplier to see if there’s a large-scale issue that’s affecting multiple homes.
- Valve problems: If the water pressure is low throughout your entire home and not just at one or two faucets or fixtures, you should go down and check the main shutoff valve to see if it is completely open. If you recently had any plumbing work done at your home, there’s a possibility this valve was not completely opened back up. There’s also a chance you have a pressure-reducing valve installed, which could inhibit your water pressure.
For more information about common water pressure issues in Shreveport, LA and the plumbing maintenance steps you can take to resolve them, contact Perot Plumbing, LLC today.
Categorised in: Water Pressure Issues